Before commencing any sort of excavation on a construction site, it is essential to undertake a thorough physical survey of the site using the required tools in order to establish what services and utilities there are underground and where they are. It is estimated that there are as much as 2.5 million kilometres of underground services in the UK, so they can literally be anywhere.
Not only that, but there are estimated to be 4,000,000 projects every year involving excavation at some point. On average this leads to 60,000 cable strikes each year, which is a small percentage, but nonetheless often results in injuries to workers on site and which are in some instances fatal. Even one cable strike is one too many.
Therefore, it is vital that every construction project that involves any sort of excavation – even if it is only a foot deep – is preceded by a detailed survey in order to obtain as much information as possible about what is on the site and where the services run. Once this has been obtained, then it is possible to proceed cautiously with digging. We say cautiously, because there can still be situations where the information may not be 100% accurate.
At Sygma Solutions we provide utility mapping training courses which will teach underground surveyors how to use the various tools that are involved, and how to interpret their findings. Critically, we also teach how to proceed if there may be some doubt in any given situation. There can be cases where signals given off by a service when using the CAT and Genny may be confusing, or where – despite the sophistication of today’s equipment – it may lead to a conclusion that there is nothing there when in fact there is.
As a very simple example, which we have used before, it may be that a service is buried at a depth below which the tools can read so it shows nothing present. The answer in this sort of case is to begin to dig carefully down to about a foot, and then take another reading, in which case a service may well show up if it is present.
All of these types of situations are dealt with in our utility mapping training courses. Our team has over 100 years of combined experience of locating and identifying underground services and our aim is always to ensure that when operatives have finished the course, they can proceed to carry out their surveys with confidence.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
5th – 6th September 2024
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
2nd – 6th September 2024
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
12th – 16th August 2024 Limited Availability
14th – 18th October 2024
25th – 29th November 2024
16th – 20th December 2024
Level 3 Utility Mapping and Surveying Public Course
12th – 13th August Limited Availability
14th – 15th October 2024
25th – 26th November 2024
16th – 17th December 2024
Location: Sygma Solutions training centre, Wigan
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form