At Sygma Solutions our mission is to teach operatives everything – and we mean EVERYTHING – that they need to know about cable avoidance when undertaking any kind of excavation work, and about the cable avoidance tools that are used. This includes their limitations, and they do have certain limitations. If you are not aware of them, it can lead to drawing the wrong conclusions about the location of underground services.
For example, when using the CAT and Genny – especially the latest models – you will be able to locate the depth of buried services. Or will you?
You could very easily get a reading which shows that the area that you are about to excavate has no buried services in it. Yet it could have. There is a limit to how deeply a service may be located, so when you search for it at ground level, which you obviously do, to begin with, you may get a negative result. This could lead an operative to believe that there are no services there and start to dig immediately.
The trick with this is to dig down carefully for about a foot – all excavation should be undertaken cautiously – and then REPEAT the search. You might now find that although you got a negative reading on the surface of the ground there is actually a service, or services running there. If you don’t check after each foot or so that you dig down, you could have a cable strike that could cause injury, or in some cases could be fatal. After all, there are at least 1.5 million kilometers of underground services in the UK, so they can be anywhere.
They can even be out in a field full of sheep which is probably the last place you would expect to find them, but it may be that this is simply the shortest route between two villages so that is where the utility company laid them.
You should never put implicit trust in the utility companies’ plans, or STATS, either. By all means, check them out, but don’t rely on them. Only use them as a guide, because many STATS are not accurate.
These are just a couple of the reasons why the courses that we run at Sygma Solutions go into so much more depth than many other courses that we have seen. We want your operatives to be safe at all times which is why we go to every length to ensure that nothing is left out.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
2nd – 6th June 2025 Limited Availability
28th July – 1st August 2025 Limited Availability
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
28th April – 2nd May 2025 Limited Availability
12th – 16th May 2025 Limited Availability
14th – 18th July 2025 Limited Availability
11th – 15th August 2025
8th – 12th September 2025
29th September – 3rd October 2025
27th – 31st October 2025
24th – 28th November 2025
8th – 12th December 2025
Level 3 Utility Mapping and Surveying Public Course
Location: Sygma Solutions training centre, Wigan
28th – 29th April 2025 Limited Availability
12th – 13th May 2025 Limited Availability
14th – 15th July 2025 Limited Availability
11th – 12th August 2025
8th – 9th September 2025
29th – 20th September 2025
27th – 28th October 2025
24th – 25th November 2025
8th – 9th December 2025
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form for any course