When you are engaged in any form of construction project, it all starts at ground level – literally. Or you could say, even below ground level, because every building of any description, unless it’s a garden shed, needs solid foundations. And that means digging.
When you dig into the ground, whether by hand using a spade or shovel, or using something such as a JCB, there is always the possibility that there are underground services running there. This can be as true of places where it would never occur to you that utilities might run, as it is in your local high street, an industrial estate, or a residential area where you know full well that they will be.
This is why it is necessary to use the appropriate tools, such as the CAT and Genny, along with Ground Penetrating Radar, in order to carry out a thorough survey of the site where you are going to dig – whether that is in the high street or out in the wilds.
As with many things that are technical, you need proper training in cable avoidance. As an example, you know how to use your phone and your laptop. But you didn’t just take them out of the box the first time you used them and – hey, off you go! There was a steep learning curve. Sure, you now know how to use a laptop so if you buy a new one you are pretty familiar with the way it is going to work – but not the first time around. The same thing applied when you learned to drive, even though you may have been in your dad’s car since you were a baby.
This is why the cable avoidance courses that we run at Sygma Solutions are vital in order to fully understand all the ins and outs of the tools. Our courses follow HSG47 training, the guidebook issued by the Health & Safety Executive that sets out everything that you need to know about avoiding underground services when digging. HSG47 is aimed at all those involved in commissioning, planning, managing, and carrying out work on or near underground services.
Our HSG47 training applies to all and every situation where underground services may be found and disturbed when working, which is pretty much anywhere. When you have finished our course, you will have the know-how and the confidence to carry out a full survey under any circumstances in order to avoid the dangers of striking utilities and the resultant possible danger to life and limb.
If the course you are looking for has no dates or you would like a course built for your company please contact
enquiries@sygma-solutions.com for current availability and booking form
Open Days
Please contact us about open days
PAS128 Utility Mapping Training Modules mapped to CICES competencies
– 2 days
Module 1 – Pas 128 Level D &C training to include level 3 assessment – CICES GEUS01 A-D
– 3 Days
Module 2 – PAS128 Level B Training – can include Level 4 assessment – CICES GUES01 E-I
Please contact enquires@sygma-solutions.com for future dates and a booking form
2 Day Advanced EM Course (RD8100/8200 & VIVAX)
In depth course covering electromagnetic locators, theory and intensive practical on our real world training site.
Cost: £295 per person
Location: Sygma Solutions training centre, Wigan
5th – 6th September 2024
Location: Sygma Solutions training centre, Wigan
Please contact us for future dates and a booking form
1 Day Mala GPR Module 1 – Theory & Practical
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Mala GPR Module 2 – Post processing
Cost: Contact us for price (2 spaces F.O.C. with Mala GPR Purchase)
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
2 Day GPR – All Manufacturers
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Please contact us for future dates and a booking form
5 Day TSA & ICES Approved 5 Day Utility Mapping Course
Location: Sygma Solutions training centre, Wigan
Dates: Contact Us
Location: Worcester
Dates: Contact Us
Please contact us for future dates and a booking form
1 Day Public Genny & CAT Course
Cost: £175 plus VAT
Location: Sygma Solutions training centre, Wigan
Dates:
Please contact us for future dates and a booking form
Level 3 Utility Mapping Qualification – All Online
Cost: £275 PLUS REG FEE
Location: Online
Dates: To suit
Level 5 Diploma Utility Mapping Qualification – Online Workbooks – followed by assessment
Cost £1100 PLUS REG FEE
Location: Sygma Solutions training centre or your site
Dates: To suit
Open level 5 assessment dates at Sygma Solutions, Wigan
Level 5 Diploma Utility Mapping Qualification – in 5 days
Cost – contact us
Location: Sygma Solutions training centre, Wigan
2nd – 6th September 2024
Sygma PAS 128 Utility Surveyor Training Including Proqual Level 3 Utility Mapping and Surveying
Please contact us for future dates and a booking form
Location: Sygma Solutions training centre, Wigan
12th – 16th August 2024 Limited Availability
14th – 18th October 2024
25th – 29th November 2024
16th – 20th December 2024
Level 3 Utility Mapping and Surveying Public Course
12th – 13th August Limited Availability
14th – 15th October 2024
25th – 26th November 2024
16th – 17th December 2024
Location: Sygma Solutions training centre, Wigan
GPS Course & Total Station Introduction
This is a 2 day dedicated GPS course with an introduction to Total Station
Please contact us for future dates and a booking form
Please contact enquires@sygma-solutions.com for future dates and a booking form
Please contact:
enquiries@sygma-solutions.com for current availability and booking form